![]() Dante Controller will try to automatically detect these. Possible network configuration errors are listed below. Possible IP network configuration mistakes If a DHCP server is present, the computer and Dante devices will all acquire their IP addresses via DHCP. This way it will automatically acquire a Link Local automatic IP address in the same network as other Dante devices. Your PC or Mac TCP/IP network configuration set should be set to 'Obtain an IP address automatically'. Obtain an IP address from a DHCP server if it is present on the network.Automatically assign themselves an address in the range 169.254.*.* (172.31.*.* for the secondary network if present), or.Correct IP configurationÄante hardware devices are set to obtain their IP address automatically from the network. Double-click the red device name to see more information. ![]() Note: If a device name is shown in red, it means Dante Controller has automatically detected an error condition, such as an IP address configuration issue, or the device has entered failsafe. When using Dante Virtual Soundcard or Dante Controller, your PC or Mac must be connected to the Primary and/or Secondary Dante network, and must have a correct IP address. Troubleshooting Dante IP Address ConfigurationĪll devices in a Dante network, including Dante Virtual Soundcard, must be using IP addresses from the same network. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |